A complete hifi system for three hundred bucks? We could build our own – loudspeakers, amplifier, DAC and Bluetooth streamer, interconnects and loudspeaker cable – or we could let Vanatoo and their Transparent Zero (T0) active loudspeaker system take care of the whole shebang. Unbox and go.
Not only do we lose the kabelsalat but active loudspeakers have one key advantage over their passive brethren: one amplifier per driver, each specifically tailored to its input impedance plot, and therefore optimised for the best possible sound quality.
Tying together the T0’s 4″ aluminium mid/bass driver and 1″ soft dome tweeter is a digitally active crossover network. Executed in the digital domain with prior to the amplification stage, the crossover is a DSP-based 8th-Order Linkwitz Riley at 2200Hz which, according to company co-founder Gary Gesellchen, “makes for very good off-axis response and downright scary imaging.”
Allow the music signal to pass from the input speaker to its ‘slave’ is what appears to be an Ethernet cable. Only it isn’t. Not quite. Here’s Gesellchen with the details: “The interconnect cable we supply is not really an Ethernet cable. Ethernet uses a 8 conductor cable with RJ45 connectors. We use a 10 conductor cable with RJ50 connectors. This allows 3 pairs to be used on the woofer and 2 pairs on the tweeter. The result is greater redundancy and lower cable resistance, both of which are a good thing. HOWEVER, an RJ45 Ethernet cable will plug in and work just fine, so we have maintained that flexibility for customers.”
Getting music into the T0 is a remote-controllable affair: aptX Bluetooth, USB, 3.5mm analogue and TOSLINK. Combined with their brick-like size, the latter input has the T0 primed for TV amelioration. Your average TV’s loudspeakers suck. The T0 won’t. Each loudspeaker’s reversible stand angles the speaker upwards, toward the ear, or fires ’em straight-y 180.
“The T0 won’t make your bed in the morning or butter your toast, but it does preserve the essence of music and make it more accessible than ever,” says
[On the V-T-B switch, details remain TBC. My best is guess is DSP customisation according to surface/room placement a la Dynaudio].
“The V-T-B switch serves multiple functions. When the speaker is in use the switch defines the function of the knob on top. The knob controls either the volume the treble, or the bass, depending on the switch position. If you ever lose or misplace the remote, you can still tweak the sound coming from your T0’s.”
“The less obvious use is that the switch is used when setting up the speakers to alternate configurations. You can do things like make the speaker mono (if you just want one for Bluetooth on the deck), vary the brightness of the LED, switch between “Flat” and “Shelf” EQ modes (changes bass profile and overall output level), etc. Many customers will probably never use the alternate configurations, but for those who want to changes things to best fit their usage, we think it will be really helpful. We had 3 years of customer feedback on the T1 that went into the T0, so we know what people told us they wanted.”
Having reviewed said T1, memories linger of a sound that’s clean on transient incision and BIG on bass. Bigger than that of Audioengine’s HD6. If Vanatoo’s ClearBass tech has been applied in a similar fashion here, you’ll likely want to hear the T0 before taking advantage of their subwoofer output.
Those in the Chicago area at the end of April can audition the T0 at AXPONA. Vanatoo will be in room 1249.
Gesellchen and his business / audio engineering partner Rick Kernen are more than ready: “I’m kind of excited to stand in front of a group of people who might be skeptical of a “cheap” $300 cable and claim with a straight face that they will find music from a $300 system to be listenable. And then prove it to them!”
Otherwise, taking a punt on the T0’s US$299 introductory price, after which an RRP of US$359 applies, is the way to go. Vanatoo offer 30-day returns on direct sales.
Further information: Vanatoo